Kenmore Dryer - A DIY Repair Primer

The brand name Kenmore first appeared on a Sears washing machine in the year 1927, but no one knows where the name came from. Some say it refers to Kenmore Avenue, a busy street in Chicago way back. Regardless of the brand's vague history, Kenmore has since been a trusted name in washing machines and dryers plus other household appliances. Kenmore dryers, in particular, are known for their energy efficiency and stylish designs.


With constant heavy-duty use, however, even Kenmore dryers can become subject to repair after a certain period. The good news is more and more DIYers are now eager to repair their appliances themselves, and Kenmore dyer parts are now easily accessible.


You can invest in the following parts over the years:


Tune-Up Kit - this kit consists of the dryer parts that need to be replaced evry 5 or so years - the drum support rollers, the idler puller, and the belt. You will also find a useful manual on how to do your own repairs.


Thermal Fuse - newer models of Kenmore dryers now have short elements in their burner boxes. These contain the thermal fuse which may need to be replaced after several years.


Element Kit - contains the element and the terminal adapters.


Gas Dryer Igniter - if you detect that the dryer isn't giving off any heat, make sure to check the igniter.


Thermal Cutoff Kit - this is comprised of the thermal fuse and the high-limit thermostat.


Gas Valve Coil Kit - instead of replacing the gas valves whenever they break down, you can simply repair them using this kit. You'll be amazed at how much it could save you.


Repair FAQs


Why isn't there power?


Check the cord to see if it is properly plugged in. You can also unplug and re-plug it. Next, inspect your breakers to check if a fuse has not been blown or if it hasn't been tripped. If you know how to use a volt meter, you can check the outlet itself just to make sure that there's power in that outlet.


The Kenmore dryer seems to have overheated. What should I do?


A fuse usually burns out if the dryer overheats. One of two things may happen: It can either run but not give off heat, or it can stop running completely. If a fuse is blown, replace it.


The appliance is properly plugged and there's no blown fuse; what should I do next?


It's possible that the timer is busted. As this is linked to the power function, the dryer may not sense that it has already been turned on because of the busted timer.


You can even purchase parts online, say, at partselect.com. If the problem seems impossible to fix, don't be ashamed to call a Kenmore dryer repairman. There's a friendly one available in your area who's just a phone call away.

About The Author:
Colette is the Editor and Publisher of Article Click. For more FREE articles for your ezine and websites visit - www.articleclick.com