Motorcycle Maintenance
Article Views:
68
Ezine ready page
Ezine ready page
Posted on April 1, 2006 by Kristopher Gibbs | Posted under Motorcycles
Newer motorcycles do require less maintenance than the older bikes. Because older bikes had more maintenance riders learned to maintain their bikes. This generation of riders seems to be lacking those skills because the newer bikes aren't as demanding. Never the less it is a skill you should possess. Read on to get help on maintaining your motorcycle.
Of all the motorcycle parts, the chain requires the most maintenance. You should use only the best O ring chain and keep it clean and well lubricated. Good chain maintenance will allow the chain to last for up to 20,000 miles or more.
You also need to keep the chain clean of dirt. Dirt will destroy the chain in no time at all which will then wreck the sprockets. A worn chain will increase the wear on the sprockets costing you money.
When you replace the chain you should always replace sprockets too. Never buy a cheap chain, always buy the best chain you can get and only use steel sprockets.
Lubricate the chain regularly and use only the oils recommended by the manufacturer. Most recommend either a 90w rear oil or 30w non detergent engine oil.
Tires will last longer if they are properly inflated. Most people have the tires under inflated, which causes the tires to run hotter and wear out faster. They are also more prone to blow out. Use a good pressure gauge to check them in the morning. You should do this at least once a week. f replacing tires buy the right tire for the motorcycle you are riding
You will also need to change all fluids,except engine oil, at least every two years. Brake fluid, anti-freeze, fork oil and clutch fluids will all need to be changed and you should follow the manufactures specs for replacement of fluids. If you don't change the fluids bad things will happen and believe me they do happen.
Brakes are a must have if you plan to have your bike stop. Check your break pads regularly. Do not let them wear too far because this will damage the rotors. Damaged rotors will set you back a large amount of money. Never use racing pads on a street bike as they don't get hot enough to work properly.
Check the terminal connections on your battery on a regular basis. If they become corroded clean them. You should also check the electrolyte level. If you need to add fluid use only distilled water, never tap water.
You will need to change the oil in the engine every 3000 to 5000 miles. Always use an oil that is recommended by the manufacturer.On water cooled bikes flush the coolant every year. For aluminum engines use antifreeze.
Every second year you will need to change the brake fluid and bleed the system. This includes the clutch if it is hydraulic. Use only approved fluids.
Once a year you will need to change fuel filters. If the motorcycle does not have a fuel filter than you should buy an after market one and install it.
You should spend the time to look and read the owners manual. Yes I know reading a manual, isn't that the thing you do if all else fails. Trust me in this case it is worth your effort to read it in advance.
Lubricate everything that needs to be lubricated. This includes all control cable and anything that swings or pivots such as the steering neck and swing arms don't forget shock and linkage bushings.
You also need to check the wheel bearings. Grab the wheel or tire from the side at the top and bottom and try to move the wheel from side to side. If you feel any play the wheel bearings are shot and need to be replaced.
That's it! You've just had your first lesson on motorcycle maintenance. Follow this guide and your bike will repay you by running smoothly every time. For larger maintenance issues you should visit your dealer. Be kind to your bike and it will provide you with years of hassle free riding.
About The Author:
Kristopher is the Editor and Publisher of Article Click. For more FREE articles for your ezine and websites visit - http://www.articleclick.com
Tags:
