Article Views:
75
Ezine ready page
Ezine ready page
Posted on April 1, 2006 by Tyron Tollett | Posted under Consumer Electronics
Stainless Steel Railings
|
Guard railing must meet current building code but it needs to do much more than that. It needs to look stylish and the design needs to compliment the surrounding area. Many builders prefer stainless steel and rightfully so as this is the best choice on the market and most builders are well aware of this. And for the homeowner they get a product that will stand up and look great too. So why is stainless steel so impressive and such a great choice? Well it is strong, withstands corrosion, is easily sterilized, long lasting, and it looks great. Hospitals have been using stainless instruments for years - that should tell you something. Here are the benefits of stainless steel: 1. Resistant to corrosion - all stainless is highly resistant to corrosion which makes it a great choice for almost any environment. Low alloyed grades will resist corrosion.2. Temperature resistance - Stainless is able to withstand scaling even at high temperatures and the toughness of steel is not affected by temperature extremes cold or hot.3. Easy to fabricate - Stainless is easy to work with. It is easy to cut, form, weld, and fabricate overall.4. Strong - Here is one of the strongest metals on the market and when it is heat treated it becomes even stronger. The design process allows for the strength to stay while the thickness decreases.5. Looking Good - This is a metal that isn't only strong and reliable it looks darn good and overall it is aesthetically appealing.6. Hygienic - Stainless steel is used in hospitals and kitchens because of its ability to be easily cleaned and sterilized. This makes it a good choice for railing which can carry a great deal of germs.7. Durable - Stainless is durable and has a long life cycle making it cheaper than other materials compared to based on its life expectancy.8. Low Maintenance - There is virtually no maintenance required unless there is a repair that must be conducted. Just clean and use. If you are installing a railing system commercially than your contractor will be dealing with all the details. If you are installing a railing at home you or your contractor may be doing the installation. After all if you have a deck it is required by law that you have a minimum of a two foot rail. Or perhaps you have stairs in your house which is also required to have a railing. If you are planning to undertake the project yourself here are some common mistakes to be aware of.1. It is very common to place the pickets too far apart.2. It is very common to not have the pickets even.3. The top rail may not be level.4. The pickets may not be plumb. There are many different types or railing systems on the market. You'll need to choose according to your needs and your budget. Different styles look different but more importantly they perform different jobs. So for example the railing you would choose for your stairs might be completely different that which you choose for your deck railing. If you are using a design from a book or you've purchased some plans online make sure you follow the directions carefully. The drawings should be easy to follow and the instructions clearly written. There's nothing worse than building your deck and discovering that it isn't stable and that you have to start over again. Your deck installation must be done properly and it must meet all code. It is important that you do not take any short cuts. Different jurisdictions have different height requirements so know what's expected in your area. They will also have code relating to spacing and the baluster gap. Start by taking your measurements and calculating how much material you will need. Don't forget about end caps, joiners, balusters, and all the other bits and pieces you'll need. Do your math and then you'll be ready to place your order. Often the easiest way is to have it delivered to your door, especially if the order is on the larger size. That way they'll load, unload and stack and you can save your energy for getting busy on your railing. When choosing style you'll need to consider such things as width of the bars, width of the rail cap, plain bar, twisted bar, patterns, and so much more. Have a look at some of the available online catalogues or visit your local hardware store to see exactly what your options are. So if you are in the market for the installation of some railing then you definitely need to consider stainless steel railings. About The Author: Tyron is a professional writer and writes about various different subjects. One of his favourite subject is stainless steel. Visit the website at http://www.stainless-steel-now.com to get more information about various different stainless steel products available in the market. |
Tags:
