Article Views:
166
Ezine ready page
Ezine ready page
Posted on April 1, 2006 by Jesse Rosato | Posted under Consumer Electronics
Vacuum Repair for the Average Person
|
The first thing to do when faced with a poorly performing vacuum is to check that none of the hoses are damaged. If there is a hole in one of them, this allows air to escape and greatly reduces suction power. If the hose and the main unit no longer fit together snuggly, due to wear and tear on the movable parts, this destroys the airtight seal between them which also impacts suction power. The next step in vacuum repair is to check your machine for obstructions that have become lodged in the hoses or, in the case of an upright vacuum, the main agitator brush. If obstructions are found such as lint, hair, or items too large to pass through the opening, simply remove them and test to see if this has improved the machine's performance. If it has, then there is no need to proceed further. However, even if an obstruction was the initial cause of the problem, it may have lead to other problems if it was not dealt with immediately. Blockages can cause belts to break or burn out. If you notice a burning smell when running the vacuum, it is best to turn it off immediately so as not to cause a fire. If you are particularly skilled with machinery, you can do some vacuum repair by taking the machine apart and inspecting the belts to see if any need replacement. Then it is simply a matter of purchasing a new belt from a hardware store. It is recommended that you bring the broken belt with you so that if any questions arise about the make or model of your machine or what belt you are looking for, you have all that information with you. However, disassembling the machine is really not a wise choice if you are not proficient with the mechanical workings of such machines. The risk of shock presents itself even while the machine is unplugged, not to mention the fact that untrained hands may actually do more damage to the inside of the machine. Finally, an often overlooked issue that necessitates vacuum repair is damage to the power supply. Inspect the power cord as well as the portion that plugs into the outlet. The metal prongs that slide into the outlet should be parallel to one another and perpendicular to the plug. They should not be bent in any other direction. If either the cord or plug reveal exposed wire or appear frayed, it may require replacement. It may be necessary to deal directly with the manufacturer in this case, so it may only be possible with models produced in the last few years. About The Author: Jesse Rosato is the Editor and Publisher of Article Click. For more FREE articles for your ezine and websites visit - www.articleclick.com |
Tags:
